What Can You Use To Clean A Dry Erase Board

Download Commodity

Download Commodity

If you've ever used a dry erase board, you've probably run into problems with trying to get it completely clean. When writing or drawings are left on a whiteboard, they can leave troublesome stains that are all also hard to wipe off. Fortunately, there are a number of constructive means you can apply cleaning solutions or even everyday items from around your house to make clean your dry erase lath.

1. ane

   Remove as many markings as possible with an eraser or cloth. Apply a microfiber cleaning fabric or felt eraser to clean as much of the board as you tin can before applying the cleaner. Press down firmly and wipe in a round motion as you erase.^[one]

   • Make sure you lot apply a clean cloth or eraser; trying to erase markings with a dingy cloth or eraser will just stop up making your board fifty-fifty dirtier!
   • You tin clean the felt eraser or cloth by running information technology under cold water until it'due south visibly cleaner and then assuasive it to air dry out.

2. 2

   Spray the dry erase lath cleaner onto the board. Apply plenty of the cleaner then that there is a thin layer of the solution over the area you intend to clean. You just need to spray the cleaner onto the markings you hope to clean, although if y'all want to clean the unabridged board, y'all should spray the cleaner everywhere.^[2]

   • Exist certain to use a not-toxic dry out erase board cleaner on your whiteboard, especially if information technology's located in a classroom or other environment where immature children are exposed to it.

   Ad

3. three

   Wipe off the whiteboard cleaner. Use a clean, dry material to wipe away the dry out erase board cleaner after you've sprayed it onto the board. Wipe the lath in a circular motion, pressing downwards firmly, until the marks have been removed.^[iii]

4. four

   Consider using paint remover on troublesome stains. If the stains are not sufficiently removed by whiteboard cleaner, you may want to use a paint or adhesive remover instead. Use the remover to a soft fabric and blot it over the stained area until it's completely covered. So, wipe away the remover with a clean cloth, wiping over again firmly in a circular motility.^[4]

   • Make certain you read the warnings and precautions on the characterization of the paint remover or agglutinative remover earlier using it on your dry out erase board, especially if children are often exposed to the lath.

5. v

   Rinse the board with h2o to remove the cleaner and dry out it. One time your board is sufficiently clean, rinse the board with common cold water to remove any excess or leftover whiteboard cleaner. Then, dry out with a soft cleaning cloth or dry erase cleaning textile.^[5]

   • If your board is too large to be rinsed with water, y'all tin alternatively dip a make clean cloth in h2o and utilise that to "rinse" away the excess cleaner.

   Advertisement

1. i

   Clean the board with rubbing alcohol if y'all don't have any commercial cleaner. Rubbing booze, or isopropyl alcohol, is a very effective cleaning solution when applied to dry erase boards.^[six] Soak a small piece of cloth in rubbing booze and apply it to wipe the lath clean. Rinse the cloth in warm h2o and wipe the board once more to remove more troublesome marks.^[seven]

   • For best results, use a solution with at least a 90% isopropyl concentration. 99% is the ideal concentration for use every bit a dry out erase board cleaner.
   • Solutions with lxx% concentrations will also work, although they will be less effective than solutions with higher concentrations.

2. 2

   Use window cleaner if y'all already accept it on mitt. Windex is actually equally effective as most dry out erase board cleaners at removing marks and stains. Spray some Windex on a dry cloth and wipe the board in large circular motions to easily make clean your board without having to exit to purchase a separate whiteboard cleaner.^[viii]

   • Avoid wiping the board in direct lines, as this will simply button marker residue to the dissimilar edges of the dry out erase board and make it harder for yous to make clean information technology in the long run.
   • Make sure y'all remove all Windex residual from the board after you've cleaned information technology. Rinse the board in cold water or use a clean wet cloth to wipe away the excess Windex. Any leftover Windex will make information technology hard for you lot to write on the lath in the future.

3. 3

   Put hand sanitizer on a paper towel and apply it as a user-friendly cleaner. Use the paper towel to spread the hand sanitizer onto the markings you lot want to remove from the dry erase board.^[nine] Let the sanitizer to stay on the markings for 30 seconds, then use more paper towels to remove it.

   • You tin can also use a soft dry out cloth to remove the hand sanitizer.
   • At that place's no ane brand of hand sanitizer that works all-time on dry erase boards; any inexpensive brand will exercise!

4. 4

   Apply baby wipes to clean your board if yous have small-scale children. If you happen to have excess infant wipes in your firm, yous can likewise put them to use to make clean your muddy whiteboard! But scrub the whiteboard with the baby wipe until the markings are gone and the lath is make clean.^[10]

   • Notation that yous may accept to vigorously scrub the board with the baby wipe in guild to remove more than hard marks and stains.

5. 5

   Scrub your board with a toothbrush and toothpaste for troublesome stains. Run an onetime, clean toothbrush nether h2o, apply the toothpaste, and scrub the whiteboard with the toothbrush until it's make clean. Once the lath is make clean, wipe the board with a paper towel or absorptive cloth to remove the excess liquid.

   • For best results, use ordinary white toothpaste to clean your lath.
   • You can as well employ this method to remove permanent marker from your dry erase board and to clean other non-porous surfaces.

6. 6

   Mix baking soda with water and utilize the mix to cheaply clean your board. Mix water into a small container of baking soda until it forms into a thick paste. Then, apply a newspaper towel to dab a modest amount of the paste onto your whiteboard and vigorously scrub the board until it's clean. Finally, wipe the lath with a wet paper towel.

   • You can use a paper towel or fabric to dry the board later you've cleaned it, although it's besides fine for you to let it air dry.
   • There's no set amount of baking soda yous should mix with the water; merely continually mix small amounts of baking soda into a basin or glass of water until it forms into a thick paste.

7. 7

   Use nail smoothen remover and cotton wool to gently clean your lath. Apply a generous amount of nail polish remover to a cotton or linen fabric. Then, gently rub your dry erase board with the fabric until it's make clean. Apply a separate damp cloth to wipe the nail polish remover off the board and dry it with a paper towel.^{[xi] [12]}

   • If you only want to clean a small part of your dry erase board, you might want to consider only using a cotton ball instead of a textile.

8. 8

   Clean your board with dry cleaner fluid if it can handle abrasive compounds. Dry cleaner fluid and carpet stain remover use cleaning chemicals that can too be used to make clean your whiteboard. Spray the fluid onto your board equally you lot would with whiteboard cleaner, then wipe it away with a sponge.^[13]

   • Make sure that your board isn't made of a substance, such as porcelain, that will be harmed by abrasive compounds in the cleaner fluid.

   Advertising

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertizement

Thanks for submitting a tip for review!

About This Article

Commodity Summary 10

To clean a dry erase board, try soaking a cloth in some rubbing alcohol and wiping down the board with information technology. You can besides use a glass window cleaner, some hand sanitizer, or even baby wipes if you take some on hand. If you run into stubborn stains that won't come up out, try scrubbing them with a toothbrush and some toothpaste. Or, you can make a paste by mixing baking soda and water and then scrub the board with it. To learn how to make clean a dry out erase lath with a dry erase cleaner, continue reading!

Did this summary assist you lot?

Thanks to all authors for creating a page that has been read 14,357 times.

Did this commodity aid you?

Source: https://www.wikihow.com/Clean-Dry-Erase-Boards

Posted by: haugenagaim1997.blogspot.com

Share this post